WFD Register of Protected Areas - Groundwater bodies for Drinking Water (WFD RBMP Cycle 3)
All Water Framework Directive (WFD) Groundwater bodies have been identified as Drinking Water Protected Areas due to the potential for qualifying abstractions of water for human consumption as defined under Article 7 of the WFD. The groundwater drinking water protected areas (DWPA) are represented by the full extent of each WFD groundwater body.
Simple
- Alternate title
-
WFD RPA Groundwater bodies for Drinking Water
- Date (Creation)
- 2018-12-01T00:00:00
- Date (Publication)
- 2018-12-01T00:00:00
- Date (Revision)
- 2018-12-01T00:00:00
- Citation identifier
- HH.IE.EPA.WFD_RPA_DRINKINGWATER_GWB_WFDRBMPCycle3
- Purpose
-
To identify the Drinking Water Groundwater bodies in accordance with European Communities (Drinking Water) (No. 2) Regulations 2007 (SI no. 278/2007).
This dataset represents a snapshot taken in December 2018 for the purpose of the WFD RBMP Cycle 3.
- Status
- Completed
- Point of contact
-
Organisation name Individual name Electronic mail address Role Environmental Protection Agency
Informatics
Point of contact
- Maintenance and update frequency
- As needed
-
GemetInspireTheme
-
-
Human health and safety
-
-
GEMET - Concepts, version 3.1
-
-
drinking water
-
ground water
-
environmental policy
-
water protection
-
-
Environmental Protection Agency
-
-
waterbody
-
groundwater
-
drinking water
-
-
ISO 3166
-
-
IE
-
- Use limitation
-
Data is for public use under Creative Commons CC-By 4.0
- Access constraints
- License
- Use constraints
- License
- Other constraints
- Spatial representation type
- Vector
- Denominator
- 50000
- Language
- English
- Character set
- UTF8
- Topic category
-
- Environment
- Begin date
- 2016-09-01T00:00:00
- End date
- 2016-09-01T00:00:00
Vertical extent
- Minimum value
- 0
- Maximum value
- 1014
Vertical CS
Vertical datum
- Reference system identifier
-
http://www.opengis.net/def/crs/EPSG/0/29902
EPSG Geodetic Parameter Dataset EPSG 2009-11-25
- Distribution format
-
Name Version ESRI Shapefile
10.x
- Distributor contact
-
Organisation name Individual name Electronic mail address Role Environmental Protection Agency
Informatics
Publisher
- OnLine resource
- Hierarchy level
- Dataset
Conformance result
- Alternate title
-
INSPIRE Data Specifications v3.0
- Date (Publication)
- 2013-12-10
- Explanation
-
The INSPIRE Directive or INSPIRE lays down a general framework for a Spatial Data Infrastructure (SDI) for the purposes of European Community environmental policies and policies or activities which may have an impact on the environment.
- Pass
- No
Conformance result
- Alternate title
-
INSPIRE Interoperability Regulation
- Date (Publication)
- 2010-12-08
- Explanation
-
Level of conformance with the COMMISSION REGULATION (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services
- Pass
- No
- Statement
-
This dataset represents a snapshot taken in December 2018 for the purpose of the WFD RBMP Cycle 3.
The legislation governing the quality of drinking water is set out in the European Communities (Drinking Water) (No. 2) Regulations 2007 (SI no. 278/2007). The actual protected areas for drinking waters are not outlined within the Regulations, as a result, the protected area for drinking waters is represented by the water body from which the water is abstracted and the associated drinking water abstraction point. During 2004-2005 and again in 2008-2009 a register of drinking water abstractions was collected from Local Authorities. This abstractions list was used to identify water bodies that are sources for drinking water. The entire water body is to be used to represent the protected area (groundwater body, lake or river).Where water is abstracted from a river or lake that was not initially selected as a water body (i.e. 1st or2nd order rivers or lakes smaller than 50 hectares) the water is then designated as a protected area and the1st or 2nd order stream or small lake is reclassified as a waterbody. Spatial Accuracy: all protected water bodies are extracted from the existing WFD water body layers: spatial accurracy of each of the water body types (river, lake or groundwater) is described in the metadata for that layer. Thematic Accuracy: Drinking water scheme and abstraction point codes are those used locally at the Local Authority level. Protected area codes are unique incremental numbers. Currency: Abstractions data was collected in 2004 and updated in 2009. Logical Consistency: The dataset meets the topological requirements set out in Guidance Document number 22: Support for Reporting of RBMP, Guidance on reporting of spatial data.
Metadata
- File identifier
- 4b733ddb-c228-42fe-be81-88461ab8f2a6 XML
- Metadata language
- English
- Character set
- UTF8
- Hierarchy level
- Dataset
- Date stamp
- 2022-11-07T11:33:16Z
- Metadata standard name
-
ISDI Metadata Profile
- Metadata standard version
-
1.2
- Metadata author
-
Organisation name Individual name Electronic mail address Role Environmental Protection Agency
Data Analyst
Point of contact
EPA Ireland Catalogue